Laptop Liquid Cooling Kit Water Pump Reservoir Hard Tube 275mm CPU Heatsink DIY

Laptop Liquid Cooling Kit Water Pump Reservoir Hard Tube 275mm CPU Heatsink DIY. This is a notebook water-cooled suit, the product is novel and easy to install.

In order to facilitate customers to use different sizes of joints in different environments, we have adopted G1/4 thread. In order to avoid the leakage of the interface crack caused by the commonly used plastic interface in the market, we have built-in pure copper built-in copper nail to solve such problems. In addition, innovative use of the detachable function of the water tank, damage to the water tank, or replacement of large capacity water tanks becomes possible. Moreover, we have added real-time water temperature detection function to expand the function, so that industrial customers can always master the water temperature. Compared with the air-cooling heat dissipation, the water-cooling package has a more significant heat dissipation effect.

Small size, not occupy space, can be placed on the desktop. 275 120 32 mm/ 10.8 4.7 1.3 in. Composition: Double layer flat tube, flat tube 24. Motor: three-phase permanent magnet motor. Minimum starting voltage: 3.8V.

PWM automatic temperature control: support. Extended function: temperature display + detachable water tank.

120 120 25 mm/ 4.7 4.7 1.0 in. Maximum static pressure: 1.703mm-H20. Working voltage: 10.8-13.2VDC. 2 RGB Lighting Choke Plug. 1 90 ° Connector Head. Lock the two fans with the M332 screws on the water line. Lock the two I-type brackets with the M416 screw + M4 nut on the water row bracket.

Lock the water drain with the M332 screw on the installed I-bracket in step 2. After the third step is installed with M332 screws, the other side is locked with M312 screws. Lock the other I-type bracket with M410 screws + nuts on the two 90° brackets.

Lock the 90° bracket with the M38 screw on the bottom of the pump. Lock the pump with M312 screws in the middle of the water row. According to the picture, the 90° head, expansion joint, hard tube quick twist, 90° elbow, pagoda are installed on the water drain and the water pump. Turn the hard tube fast and turn it on. The silver head is mounted on the metal tee.

The quick-turn nut and the sealing ring are respectively mounted on the hard tube. The RGB plug light is mounted on the other end of the metal tee.

The headlights are mounted above the water pump to complete the installation. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better.

We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item "Laptop Liquid Cooling Kit Water Pump Reservoir Hard Tube 275mm CPU Heatsink DIY" is in sale since Friday, December 14, 2018. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Fans, Heat Sinks & Cooling\Water Cooling". The seller is "besttrade360" and is located in Hong Kong.

This item can be shipped worldwide.

• Brand: Unbranded
• Country/Region of Manufacture: Hong Kong
• Interface: G1/4 thread
• MPN: Does Not Apply
• Suitable for: Laptop / Notebook
• Type: Water Cooling Kit