40 to 130C (-40 to 266F). Hardware Bag: Relay, Scotch Lock, Ring Terminal, Self Tapper. 1,170 grams (2.60lbs). 500 kPa (72.5 psi).
128mm x 85mm x 188mm. 38mm to 51mm (1-1/2" to 2"). This high capacity EWP®150 (40 US Gal/Min) is designed to replace and/or complement the existing belt driven mechanical water pump and when fitted with the optional Digital Controller (Part # 8020), replaces the thermostat.
The major benefits a EWP®150 offers are. > Minimise the parasitic power losses running a mechanical water pump at high speed when not needed > Maximise engine warm-up & minimise the effects of heat soak by operating the EWP®150 after engine shut down. The EWP®150 has the advantage of offering more consistent coolant flow independent of the engine revs. The fitment of the EWP® & Fan Digital Controller to your engine, which is scientifically calibrated to manage the volume/flow of engine coolant with the corresponding increase in coolant temperature within the engines cooling system.From start-up, the EWP® & Fan Digital Controller will'system check' the EWP®150 and Thermatic Fan operating the pump and fan for approx. Low engine temperature, low flow (10-on - 30-off pwm) reduces engine warm-up time, arriving at your targeted/set temperature quicker, assisting control the engine temperature within your -5 to +3 degree targeted/set temperature range. The Electric Thermatic Fan/s will be deployed at +3C above targeted/set temp if slower travel (traffic) or engine idle conditions continue. The EWP® & Fan Digital Controller will continue operating after a hot engine shut down for a approx.
2 minute period to help prevent damaging heat soak. NOTE : we do not make false claims on invoice values as this is against the law, so please do not ask. The item "Electric Water Pump EWP150 Kit (Part #8060) (Davies Craig)" is in sale since Thursday, May 05, 2016. This item is in the category "Vehicle Parts & Accessories\Car, Truck Parts\Cooling Systems\Water Pumps".123" and is located in Preston, VIC.This item can be shipped worldwide.