Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)

Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)
Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)
Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)

Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)

Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409). This is a combo kit which includes Davies Craig parts. Digital Thermatic® Fan Switch with 1/4 NPT Thermal Sensor Kit (0445).

Digital Thermatic® Fan Switch with 1/4 NPT Thermal Sensor Kit (Part #0445). Comp Fitting 6.35mm Sensor. Davies Craig designed Digital Thermatic Fan Switch Kit can be used with Thermatic Fans, EWP's and competitors Fans.

This kit comes with two sensors to enable various. Probe (Air or Coolant Fitment). ¼ NPT Thermal Sensor Kit (Coolant Fitment Only). It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can also be placed directly into the coolant system in combination with the included Temperature Sensor Adapter Kit (Part 0409). Sensor 2: The Thermal Sensor can be placed into the thermostat housing, engine block, or directly into the radiator. If you would like to install this sensor in the top radiator hose. It can also be used with the included Temperature Sensor Adapter Kit (Part 0409). It can run 1 or 2 fans and be used for 12 or 24 volt applications. It has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. Fan #1 will start once the temperature reaches the set temperature. Fan #2 (if applicable) will start operation 10 seconds after fan #1 starts. The fan/s will operate until the temperature falls by 5°C below the set temperature. We have 24 Volt relays listed on our store, part #0534. Single speed - 10 sec. Delay to start Fan #2. Recommended for all DCPL fans +2x14 HP & 2x16 Fans. Red LED digital temp display actual temp & set temp. Set display °C or °F. Battery + Battery - IGN, AC Clutch. Fan #1 & Fan #2 Temperature Probe &.

95 x 65 x 56 mm. Note: if using this switch for use with and Electric Water Pump (EWP), it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature.

For EWP control, Davies, Craig recommend the Digital Controller (Part 8002) which can manage both the EWP and your Thermatic Fans. The item "Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)" is in sale since Friday, October 2, 2020. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Cooling Systems\Water Pumps".123" and is located in Preston, VIC.

This item can be shipped worldwide.


Digital Fan Switch With 1/4 NPT Sensor & Inline Adapter Kit (Part 0445 + 0409)


Index  Sitemap  Contact Us  Privacy Policy  Service Agreement