The revolutionary, Australian designed, EWP pump is made from anti-corrosive, lightweight, glass-filled nylon & incorporates a carbon mechanical face seal for added reliability. The EWP improves engine cooling control & capacity while giving you more power & improved fuel economy. The EWP is universal & fits almost all makes of vehicles on the road today.
Included in the kit is everything you need to fit it to your vehicle, including easy Do-It-Yourself instructions. Introducing the world's first universal fit, automotive Electric Water Pump EWP®. Replaces and out-performs existing belt-driven water pumps.
Davies, Craig now has two EWP Electric Water Pump models to choose from. Flow rate of 80 litres/min.
This pump is suitable for cars with engine capacity up to 5 litres. Flow rate of 110 litres/min. This pump is suitable for larger, high performance engines and 4WDs.The revolutionary, Australian designed, EWP pump is made from anti-corrosive, lightweight, glass-filled nylon and incorporates a SiC x carbon mechanical face seal for added reliability. The EWP is a performance accessory that improves engine cooling control and capacity while giving you more power and improved fuel economy. The EWP is universal and fits almost all makes and models of vehicles on the road today. Included in the kit is everything you need to fit it to your vehicle in an afternoon, including, easy to understand, Do-It-Yourself installation instructions.
Use the Davies, Craig EWP controller for optimum temperature control. The EWP Controller has a microprocessor, which will supply the pump with the voltage, that will run it at exactly the right flow rate to maintain the set engine temperature. You set the temperature you want on the smart Controller for maximum power and fuel efficiency!
With the ignition on, the EWP will run on after a hot engine shut down, eliminating heat soak. This option requires the removal of the thermostat and either the mechanical pump impeller from the pump shaft, or the bypass of the water pump pulley from the belt set-up, using a shorter belt. With Davies, Craig Thermal Switch Part No.
0401, or Electronic Switch Part No. Combine the EWP with an adjustable on/off thermal switch to add a cooling boost to an overheating cooling system when required. With the Thermal Switch connected to the battery, the EWP will run-on after a hot engine shut-down, eliminating heat soak.
Wire the pump direct to the ignition for maximum cooling - suitable for race vehicles, very hot climates and chronically over-heating engines. This option requires the removal of the engine thermostat and either the mechanical pump impeller from the pump shaft, or the bypass of the water pump pulley from the belt set-up, using a shorter belt. LPG Vehicles: When using the Electric Water Pump (EWP) on vehicles using LPG, it is recommended that an Electric Booster Pump (EBP) be fitted to the heater circuit to increase the flow and eliminate the risk of freezing LPG in the converter. The item "Davies Craig EWP80 Electric Water Pump Kit DC8005 8005 12 Volt 80 Litres Per Min" is in sale since Tuesday, September 22, 2009.This item is in the category "Vehicle Parts & Accessories\Car, Truck Parts\Cooling Systems\Water Pumps". The seller is "tuffcarparts" and is located in Melbourne, VIC. This item can be shipped to Australia, to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to New Zealand.